This website was translated using DeepL
This website was translated using DeepL
(Patent) The toilet cover is a flood-prevention safety device to be installed as needed to cover any toilet from the ground floor to the first floor; it is also effective in the basement, but water may escape from the top of the toilet tank due to the principle of communicating vessels.
*Other sizes available upon request
PLEASE NOTE : If the sizes you need are not available or if you require different shapes, we can custom-manufacture them for you.
DISCLAIMER! Carefully follow the warnings and instructions in the User and Maintenance Manual
This identification number, which RAPID has been issuing since 2017, contains the entire history of your flood protection device, ensuring seamless after-sales support—from locating replacement parts to handling any recalls.
Not all bathroom fixtures are the same shape and size.
It is pointless to install a flood prevention device in front of the door at a height greater than that of any bathroom fixture—such as a bidet or toilet, which are typically around 40 cm, and a sink, which is around 80 cm—because, due to the principle of communicating vessels, flooding would occur anyway.
Tablet with a replaceable gasket (available only in the “plus” version).
DISCLAIMER: WARNING! If this is a SAFETY access point, a safety plan must be in place that validates the use of an alternative, adequate measure before installing the flood barrier; otherwise, the area to be protected from flooding must be completely clear of people or other objects that could be endangered inside it. Dripping falls within the seal’s tolerance range, although it is not mandatory for this to occur. When installing the bulkhead to protect hazardous areas, it is recommended to implement additional safety measures as well.
